Overview
Overview
Thank you for reading this post, don't forget to subscribe!Implementing Cisco IP Telephony & Video, Part 1 (CIPTV1) v1.0 is a five-day course that prepares the learner for implementing a Cisco Collaboration solution at a single-site environment. This course focuses primarily on Cisco Unified Communications Manager Version 10.x, which is the call-routing and signaling component for the Cisco Collaboration solution.
Audience Profile
The primary target audiences for the course are:
- Network administrators and network engineers
- CCNP Collaboration candidates
Secondary audiences are:
- Systems engineers
Prerequisite(s) Recommended
The knowledge and skills that a learner must have before attending this course are as follows:
- Working knowledge of fundamental terms and concepts of computer networking, including LANs, WANs, switching and routing
- Ability to configure and operate Cisco routers and switches and to enable VLANs and DHCP
- Basics of digital interfaces, PSTN, and VoIP
- Fundamental knowledge of converged voice and data networks
Learning Objectives
Upon completing this course, you will be able to meet these objectives:
- Describe the role of Cisco Unified Communications Manager in a Cisco Collaboration Solution, including its functions, architecture, deployment, and redundancy options, and how to deploy endpoints, users, and Cisco IP Phone Services
- Describe the functions and the purpose of a dial plan and explain how to implement on-cluster calling
- Describe how to configure MGCP, H.323, and SIP gateways
- The module also describes how to create a dial plan that supports inbound and outbound off cluster calling for numbers and URIs
- Describe the types of media resources that Cisco Unified Communications Manager supports, how to configure Cisco Unified Communications Manager server software-based media resources, and how to implement Cisco hardware-based media resources
- Describe how to implement audio and video conferencing devices that can be used with Cisco Unified Communications Manager, built-in Cisco Unified Communications Manager software audio bridge, Cisco IOS-based audio and video conference bridges, and Cisco TelePresence conferencing products including Cisco TelePresence MSE 8000, Cisco TelePresence Server, Cisco TelePresence MCU, and Cisco TelePresence Conductor
- Provide an introduction to QoS with emphasis on the QoS components, often referred to as the QoS toolkit, that are used to provide services for various business applications
Course Outline
Course Outline
Module 1: Cisco Unified Communications Manager Introduction
Lessons
• Describing the Role of Cisco Unified Communications Manager, Its Architecture, and Its Deployment and Redundancy Options
• Performing Initial Cisco Unified Communications Manager Configuration
• Deploying Endpoints and Users
• Deploying IP Phone Services
Lab: Remote Lab Access
Lab: Lab Environment Exploration and Setup
Module 2: Dial Plan Introduction and Implementation of Single-Site On-Cluster Calling
Lessons
• Describing Dial Plan Components
• Implementing Endpoint Addressing and Call Routing
• Implementing Calling Privileges
• Implementing Call Coverage in Cisco Unified Communications Manager
Lab: Configuring Cisco Unified Communications Manager Initial Setup
Lab: Implementing Calling Privileges
Module 3: Implementation of Single-Site Off-Cluster Calling
Lessons
• Analyzing Single-Site Off-Cluster Calling Requirements
• Implementing PSTN Access Using MGCP Gateways
• Describing Cisco IOS H.323 and SIP Gateways
• Implementing PSTN access Using H.323 Gateways
• Describing the Cisco Unified Border Element
• Using the Cisco Unified Border Element to Access the PSTN via a SIP Trunk
• Using the Cisco Unified Border Element for URI Dialing
• Describing Dial Plan Interworking
Lab: Media Resource Configuration
Lab: Implementing PSTN Calling Using SIP Trunks through Cisco Unified Border Element
Module 4: Media Resources
Lessons
• Describing Media Resources in Cisco Unified Communications Manager
• Implementing Annunciators and MOH
• Implementing MTPs
Lab: Implementing PSTN Calling Using MGCP Gateways
Lab: Implementing PSTN Calling Using H.323 Gateways
Lab: Implementing Call Routing
Module 5: Audio and Video Conferencing
Lessons
• Describing Conferencing Devices and Their Functions
• Implementing Conference Bridges
• Describing Cisco TelePresence MSE 8000
• Implementing Cisco TelePresence Server
• Implementing Cisco TelePresence Conductor
Lab: Deploying Endpoints and Users
Lab: Implementing Call Coverages
Lab: Exclusive – Quality of Service (QoS) Configuration
Module 6: Quality of Service
Lessons
• Analyzing Quality of Service Requirements
• Describing QoS Components and their Functions
• Implementing Marking
• Implementing Policing and Shaping
Lab: Cisco TelePresence Server and Conductor Configuration
Lab: Exclusive – UnifiedFX Configuration
Lab: Exclusive CUCM Testing and Troubleshooting